Website Banner
   
 
 
   
 
  • Drill Bushings
 
 
  • Drill Bushing Nuts
 
 
  • HOIST RINGS
 
 
  • LIFTING CLAMPS
 
 
  • TOOLING COMPONENTS
 
 
• LOCATING PINS AND BUSHINGS
 
 
• HYDRAULIC CLAMPS
 
 
• DE-STA-CO TOGGLE CLAMPS
 
 
• KAKUTA TOGGLE CLAMPS
 
     
   
 
  Headquarters
25520 Avenue Stanford,
Valencia,California 91355
 
  Toll Free Ordering:
855-361-1929
Toll Free Fax Ordering
855-361-1939
 
  Email Address :
sales.usbushing@gmail.com
 
 
     
     
   


Oil Seal Gun Drill Bushings - Type GDS

Oil Seal Gun Drill bushings are intended to be used with gun-drilling machines. Using the positive sealing of the O-ring against the workpiece, your gun drilling machine will maintain the oil preasure required to continue optimum operating conditions. They are similar to Slip/Fixed renewable bushings, but with the drill bearing at the bushings head end. All American type GDS bushings are heat treated to RC 62-64 and ground concentric with .0002 T.I.R. These bushings are considered as special and not returnable. Prices available upon request.


Oil Seal Gun Drill Bushings - Type GDS







P/N A B C D F J R O-RING P/N S LOCK
SCREW
GDS-64-12 1/8 - 25/32
(.1250 - .7815)
3.20 - 19.50mm
1"
1.0000
.9998
3/4 35º 1-27/64 19/32 59/64 GDSR-64 15/16 LS-2
GDS-64-16 1/8 - 25/32
(.1250 - .7815)
3.20 - 19.50mm
1"
1.0000
.9998
1 35º 1-27/64 19/32 59/64 GDSR-64 15/16 LS-2
GDS-64-22 1/8 - 25/32
(.1250 - .7815)
3.20 - 19.50mm
1"
1.0000
.9998
1-3/8 35º 1-27/64 19/32 59/64 GDSR-64 15/16 LS-2
GDS-88-16 1/8 - 1-1/16
(.1250 - 1.0625)
3.20 - 27.00mm
1-3/8
1.3750
1.3748
1 30º 1-51/64 25/32 1-7/64 GDSR-88 1-1/4 LS-2
GDS-88-22 1/8 - 1-1/16
(.1250 - 1.0625)
3.20 - 27.00mm
1-3/8
1.3750
1.3748
1-3/8 30º 1-51/64 25/32 1-7/64 GDSR-88 1-1/4 LS-2



© Copyright  2014 US Bushing,  All rights reserved.
Current Pageid = 865