Website Banner
   
 
 
   
 
  • Drill Bushings
 
 
  • Drill Bushing Nuts
 
 
  • HOIST RINGS
 
 
  • LIFTING CLAMPS
 
 
  • TOOLING COMPONENTS
 
 
• LOCATING PINS AND BUSHINGS
 
 
• HYDRAULIC CLAMPS
 
 
• DE-STA-CO TOGGLE CLAMPS
 
 
• KAKUTA TOGGLE CLAMPS
 
     
   
 
  Headquarters
25520 Avenue Stanford,
Valencia,California 91355
 
  Toll Free Ordering:
855-361-1929
Toll Free Fax Ordering
855-361-1939
 
  Email Address :
sales.usbushing@gmail.com
 
 
     
     
   


Eldorado Type Gun Drill Bushings - Type GDE

These bushings are intended to be used with Eldorado type gun-drilling machines. Using the positive sealing of the O-ring against the workpiece, your gun drilling machine will maintain the oil preasure required to continue optimum operating conditions. They are similar to Slip/Fixed renewable bushings, but with the drill bearing at the bushings head end. All American type GDS bushings are heat treated to RC 62-64 and ground concentric with .0002 T.I.R. These bushings are considered as special and not returnable. Prices available upon request.


Eldorado Type Gun Drill Bushings - Type GDE








P/N A B C D F J R
LOCK
SCREW
GDE-64-12
1/8 - 25/32
(.1250 - .7815)
3.20 - 19.50mm
1"
1.0000
.9998
3/4 35º 1-27/64 19/32 59/64 LS-2
GDE-64-16
1/8 - 25/32
(.1250 - .7815)
3.20 - 19.50mm
1"
1.0000
.9998
1 35º 1-27/64 19/32 59/64 LS-2
GDE-64-22
1/8 - 25/32
(.1250 - .7815)
3.20 - 19.50mm
1"
1.0000
.9998
1-3/8 35º 1-27/64 19/32 59/64 LS-2
GDE-88-16
1/8 - 1-1/16
(.1250 - 1.0625)
3.20 - 27.00mm
1-3/8
1.3750
1.3748
1 30º 1-51/64 25/32 1-7/64 LS-2
GDE-88-22
1/8 - 1-1/16
(.1250 - 1.0625)
3.20 - 27.00mm
1-3/8
1.3750
1.3748
1-3/8 30º 1-51/64 25/32 1-7/64 LS-2


© Copyright  2014 US Bushing,  All rights reserved.
Current Pageid = 866