Website Banner
   
 
 
   
 
  • Drill Bushings
 
 
  • Drill Bushing Nuts
 
 
  • HOIST RINGS
 
 
  • LIFTING CLAMPS
 
 
  • TOOLING COMPONENTS
 
 
• LOCATING PINS AND BUSHINGS
 
 
• HYDRAULIC CLAMPS
 
 
• DE-STA-CO TOGGLE CLAMPS
 
 
• KAKUTA TOGGLE CLAMPS
 
     
   
 
  Headquarters
25520 Avenue Stanford,
Valencia,California 91355
 
  Toll Free Ordering:
855-361-1929
Toll Free Fax Ordering
855-361-1939
 
  Email Address :
sales.usbushing@gmail.com
 
 
     
     
   


Press Fit - Type P

Technical Information ••• Counter Bore Data

Designated as Type P, these bushings are the least expensive and most popular bushings. Generally used in single step drilling. Pressed flush in the fixture plate, they can be spaced closer together than other types of bushings. Available as unground with additional outside diameter stock.

When Ordering Speciify the Following:
Example:                     Bushing         I.D.       O.D.      Length

                    Quantity        Type          (A)         (B)           (C)

                  __________________________________________

                     24                 P                 5/16       5/8           3/4

Or, using the ANSI symbols assigned to the various sizes listed in the catalog:
Example: 24 P 40-12-5/16
ALL BUSHINGS WILL BE CONSIDERED TO BE FINISH GROUND. When ordering an unground
O.D. specify unground and add the letter "U" to the ANSI symbol, or after the bushing type.

Press Fit - Type P

Press Fit - Type P



                                                               
                                                                     


I.D. and O.D. Range


#80 -#70 I.D. x 5/32 O D. #40 - 9/64 I.D. x 1/4 O.D 1/2 - 21/32 I.D. x 7/8 O.D.
#69 - 3/64 I.D. x 5/32 O.D. 1/8 - #10 I.D. x 5/16 O.D 1/2 - 49/64 I.D. x 1" O.D.
#55 - 1/16 I.D. x 5/32 O.D. #10 - #1 I.D. x 3/8 O.D 49/64 - 27/32 I.D. x 7/8 O.D.
#55 - 1/16 I.D. x 3/16 O.D. 3/16 - "F" I.D. x 13/32 O.D 55/46 - 15/16 I.D. x 1-1/4 O.D.
#52 - #39 I.D. x 3/16 O.D. "A" - "L" I.D. x 7/16 O.D 5/8 - 1-1/32 I.D. x 1-3/8 O.D.
#80 - #70 I.D. x 13/64 O.D. 3/16 - "O" I.D. x 1/2 O.D. 1-1/64 - 1-1/8 I.D. x 1-1/2 O.D.
#69 - 3/64 I.D. x 13/64 O.D. "M" - 11/32 I.D. x 9/16 O.D. 1" - 1-25/64 I.D. x 1-3/4 O.D.
#55 - 1/16 I.D. x 13/16 O.D. 5/16 - 7/16 I.D. x 5/8 O.D. 1-3/8 - 1-49/64 I.D. x 2-1/4 O.D.
#52 - #39 I.D. x 13/64 O.D. 5/16 - 17/32 I.D. x 3/4 O.D. LARGER SIZES



© Copyright  2014 US Bushing,  All rights reserved.
Current Pageid = 744