Website Banner
   
 
 
   
 
  • Drill Bushings
 
 
  • Drill Bushing Nuts
 
 
  • HOIST RINGS
 
 
  • LIFTING CLAMPS
 
 
  • TOOLING COMPONENTS
 
 
• LOCATING PINS AND BUSHINGS
 
 
• HYDRAULIC CLAMPS
 
 
• DE-STA-CO TOGGLE CLAMPS
 
 
• KAKUTA TOGGLE CLAMPS
 
     
   
 
  Headquarters
25520 Avenue Stanford,
Valencia,California 91355
 
  Toll Free Ordering:
855-361-1929
Toll Free Fax Ordering
855-361-1939
 
  Email Address :
sales.usbushing@gmail.com
 
 
     
     
   



Strong Hold F-Clamp - Series SM


• Quality Kakuta brand Welding Clamps made to the rigidest of standards.
• Body made of tempered and hardened cold drawn profiled steel.
• Nickel and chrome plated for corrosion resistance.
• Screw made of hardened alloy steel for strength
• Three replaceable clamping pads are available and can be quickly replaced.
• Hexagon design of the screws' end is good for reinforced clamping. The use of a hexagon wrench to give you maximum holding strength.
• The clamping pressure is measured at the span of 150mm.






Strong Hold F-Clamp - Series SM


  inches (MM) inches (MM) kg lbs
P/N SPAN & DEPTH RAIL PRESSURE PRESSURE
SM 20 7.87 x 4.72 (200 X 120) 1.06 x .51 (27 x 13) 1000 2205
SM 25 9.84 x 4.72 (250 x 120) 1.06 x .51 (27 x 13) 1000 2205
SM 30 11.80 x 4.72 (300 x 120) 1.06 x .51 (27 x 13) 1000 2205
SM 40 15.70 x 4.72 (400 x 120) 1.06 x .51 (27 x 13) 1000 2205
SM 50 19.70 x 4.72 (500 x 120) 1.06 x .51 (27 x 13) 1000 2205
SM 60 23.60 x 4.72 (600 x 120) 1.06 x .51 (27 x 13) 1000 2205



© Copyright  2014 US Bushing,  All rights reserved.
Current Pageid = 969