Website Banner
   
 
 
   
 
  • Drill Bushings
 
 
  • Drill Bushing Nuts
 
 
  • HOIST RINGS
 
 
  • LIFTING CLAMPS
 
 
  • TOOLING COMPONENTS
 
 
• LOCATING PINS AND BUSHINGS
 
 
• HYDRAULIC CLAMPS
 
 
• DE-STA-CO TOGGLE CLAMPS
 
 
• KAKUTA TOGGLE CLAMPS
 
     
   
 
  Headquarters
25520 Avenue Stanford,
Valencia,California 91355
 
  Toll Free Ordering:
855-361-1929
Toll Free Fax Ordering
855-361-1939
 
  Email Address :
sales.usbushing@gmail.com
 
 
     
     
   


Strong Hold F-Clamp - Series FS

• Quality Kakuta brand Welding Clamps made to the rigidest of standards.
• Body made of tempered and hardened cold drawn profiled steel.
• Nickel and chrome plated for corrosion resistance.
• Screw made of hardened alloy steel for strength
• Three replaceable clamping pads are available and can be quickly replaced.
• Hexagon design of the screws' end is good for reinforced clamping. The use of a hexagon wrench to give you maximum holding strength.
• The clamping pressure is measured at the span of 150mm.





Strong Hold F-Clamp - Series FS

  inches (MM) inches (MM) kg lbs
P/N SPAN & DEPTH RAIL PRESSURE PRESSURE
FS 30 11.8 x 6.89 (300 x 175) 1.57 x .80 (40 x 20) 2200 4850
FS 40 15.70 x 6.89 (400 x 175) 1.57 x .80 (40 x 20) 2200 4850
FS 50 19.70 x 6.89 (500 x 175) 1.57 x .80 (40 x 20) 2200 4850
FS 60 23.60 x 6.89 (600 x 175) 1.57 x .80 (40 x 20) 2200 4850
FS 80 31.50 x 6.89 (800 x 175) 1.57 x .80 (40 x 20) 2200 4850
FS 100 39.40 x 6.89 (1000 x 175) 1.57 x .80 (40 x 20) 2200 4850
FS 150 59.10 x 6.89 (1500 x 175) 1.57 x .80 (40 x 20) 2200 4850




© Copyright  2014 US Bushing,  All rights reserved.
Current Pageid = 971