• Quality Kakuta brand Welding Clamps made to the rigidest of standards.
• Body made of tempered and hardened cold drawn profiled steel.
• Nickel and chrome plated for corrosion resistance.
• Screw made of hardened alloy steel for strength
• Three replaceable clamping pads are available and can be quickly replaced.
• Hexagon design of the screws' end is good for reinforced clamping. The use of a hexagon wrench to give you maximum holding strength.
• The clamping pressure is measured at the span of 150mm.
Strong Hold F-Clamp - Series FG
| |
inches (MM) |
inches (MM) |
kg |
lbs |
| P/N |
SPAN & DEPTH |
RAIL |
PRESSURE |
PRESSURE |
| FG 25 |
9.84 x 4.72 (250 x 120) |
1.18 x .59 (30 x 15) |
1200 |
2646 |
| FG 30 |
11.80 x 5.51 (300 x 140) |
1.18 x .59 (30 x 15) |
1200 |
2646 |
| FG 40 |
15.70 x 4.72 (400 x 120) |
1.18 x .59 (30 x 15) |
1200 |
2646 |
| FG 50 |
19.70 x 5.51 (500 x 140) |
1.18 x .59 (30 x 15) |
1200 |
2646 |
| FG 60 |
23.60 x 4.72 (600 x 120) |
1.18 x .59 (30 x 15) |
1200 |
2646 |
| FG 80 |
31.5 x 5.51 (800 x 140) |
1.18 x .59 (30 x 15) |
1200 |
2646 |
| FG 100 |
39.40 x 4.72 (1000 x 120) |
1.18 x .59 (30 x 15) |
1200 |
2646 |