Website Banner
   
 
 
   
 
  • Drill Bushings
 
 
  • Drill Bushing Nuts
 
 
  • HOIST RINGS
 
 
  • LIFTING CLAMPS
 
 
  • TOOLING COMPONENTS
 
 
• LOCATING PINS AND BUSHINGS
 
 
• HYDRAULIC CLAMPS
 
 
• DE-STA-CO TOGGLE CLAMPS
 
 
• KAKUTA TOGGLE CLAMPS
 
     
   
 
  Headquarters
25520 Avenue Stanford,
Valencia,California 91355
 
  Toll Free Ordering:
855-361-1929
Toll Free Fax Ordering
855-361-1939
 
  Email Address :
sales.usbushing@gmail.com
 
 
     
     
   


Floating Pin Locator Bushings - 445-00

Case Hardened and Ground - Black Oxide Finished

Floating Locator Pin Bushings use precise location on one axis while having a floating location
on the opposite axis. These are ussually used with a fixed locator pin to locate from two
holes in a workpiece. Floating Locator Pin Bushings can replace relieved locator pin.

FEATURES & BENEFITS
• Hold fixture location to within ±.050.
• Ideal for mastertool cordination.
• Eliminate jig boring.
• Numerical control tooling.

INSTALLATION
A. Drill and ream a 3/16 hole, 5mm for metric sizes, for the roll pin.
B. Bore mounting hole to provide minimum diametral interference, 0.0003 to 0.0005 inch,
.0076 to 7 mm, is generally adequate.

C. Press slotted locator bushing and roll pin together until flush with top of plate. The roll pin
sets a precise alignment between slotted hole and layout axis.







Floating Pin Locator Bushings - 445-00






P/N A B C D E F G H J
445-00 .2500 / .2495 .300 .400 .500 1.000 .500 .500 .625 1/8
445-05 .3125 / .3120 .300 .400 .500 1.000 .500 .500 .625 1/8
445-10 .3750 / .3745 .300 .400 .500 1.000 .500 .500 .625 1/8
445-15 .5000 / .4995 .300 .400 .500 1.000 .500 .500 .625 1/8
445-20 .6250 / .6245 .310 .400 .500 1.000 .500 .500 .625 1/8
445-25 .2500 / .2495 .300 .900 .500 1.000 .500 .500 .625 1/8
445-30 .3125 / .3120 .300 .900 .500 1.000 .500 .500 .625 1/8
445-35 .3750 / .3745 .300 .900 .500 1.000 .500 .500 .625 1/8
445-40 .5000 / .4995 .300 .900 .500 1.000 .500 .500 .625 1/8
445-45 .6250 / .6245 .310 .900 .500 1.000 .500 .500 .625 1/8

© Copyright  2014 US Bushing,  All rights reserved.
Current Pageid = 896