Website Banner
   
 
 
   
 
  • Drill Bushings
 
 
  • Drill Bushing Nuts
 
 
  • HOIST RINGS
 
 
  • LIFTING CLAMPS
 
 
  • TOOLING COMPONENTS
 
 
• LOCATING PINS AND BUSHINGS
 
 
• HYDRAULIC CLAMPS
 
 
• DE-STA-CO TOGGLE CLAMPS
 
 
• KAKUTA TOGGLE CLAMPS
 
     
   
 
  Headquarters
25520 Avenue Stanford,
Valencia,California 91355
 
  Toll Free Ordering:
855-361-1929
Toll Free Fax Ordering
855-361-1939
 
  Email Address :
sales.usbushing@gmail.com
 
 
     
     
   


TOOLING COMPONENTS
  • HANDLES


ADJUSTABLE TORQUE HANDLES
This useful torque-controlling device controls forward force and assemblies, machinery, etc., where ordinary torque screws would require considerable machining or customizing.
A simple wrench adjustment in the torque handle head permits holding pressures to be varied as needed.
Adjustable from a 15 pounds minimum. Threaded insert is hardened steel. Controlled end pressure for all fixture applications.  Maximum 115 pounds.
MALLEABLE IRON HANDLES
  • SINGLE & DOUBLE ARM
FIXED HANDLE & REVOLVING HANDLE
These fixed steel handles are well proportioned, and have comfortable grips.
These revolving steel handles are well proportioned, and have comfortable grips.
CHROME PLATED
MACHINE HANDLE
  • REVOLVING TYPE
  • SOLID TYPE
FINGER HANDLES
SOLID STEEL HANDLE
  • PRESS TYPE
  • THREADED TYPE
A strong, steel fixed handle, polished and plated in satin chrome. Available with either a threaded or press-fit end.
- Polished satin chrome plating.
REVOLVING STEEL HANDLE
  • PRESS TYPE
  • THREADED TYPE
Similar to the SOLID STEEL HANDLE except that it revolves. The handle comes in two parts. The core shaft must be press-fitted or threaded into the hand wheel before the outer shell is inserted into the core shaft.
- Polished satin chrome plating.
REVOLVING PLASTIC HANDLE
Similar to the STEEL HANDLE (revolving). The handle is made of black Bakelite plastic. Handle outside diameter is larger than the SOLID STEEL HANDLE.
Material: Bakelite handle, black.
Steel screw, black.
FOLDING HANDLE, STUD TYPE
STUD TYPE Folding Handles can be folded away when not in use.
- Material: Bakelite handle, black.
Steel stem, black.
FOLDING HANDLE WITH TAPPED HOLE
TAPPED HOLE STYLE Folding Handles can be folded away when not in use.
- Material: Bakelite handle, black.
Steel stem, black.
BALANCED STEEL SINGLE CRANK HANDLES
Balanced steel crank handle - balanced for better control. Center hole is cross-drilled in one wall for easy installation.
Polished satin chrome plating.
BALANCED SOLID / REVOLVING CRANK HANDLES
New replacement handle for Bridgeport Mills*
NOTES:
These steel balanced crank handles comes either with a revolving
or solid handle and are balanced at the center.
Polished and bright chromed.
Center hole is cross drilled on one wall
BALANCED STEEL DOUBLE CRANK HANDLES
Double Crank Handle - used for lathe saddle, and other applications where small but precise motion is required for greater clamping pressure. Mounting hole is cross-drilled in one wall for easy pin installation.
CRANK HANDLES NEW!
  • REVOLVING HANDLE
  • FIXED HANDLE
Strong malleable iron crank handle has a comfortable grip.
- MATERIAL: Malleable Iron
- FINISH: Body - Plain,
Handle - Chrome Plated
ADJUSTABLE HANDLE, I.D. TYPE, "A"
  • REAMED
  • TAPPED
This handsome zinc alloy handle is adjustable to 20-45 positions. When handle is lifted, the spline is disconnected while insert or stud remains stationary. Handle can be rotated to desirable position. Release of the handle will reengage spline for tightening or loosening action. Can be used in tight spots no dead angles. Easily repositioned out of the way.
Convenient position for maximum leverage, positive grip, black handle.
ADJUSTABLE HANDLE, STUD TYPE, "B"
STUD TYPE
Material: Solid ZINC handle, black.
steel insert.
HIGH IMPACT PLASTIC HANDLE
  • STUD TYPE
  • TAPPED HOLE
Similar to the ADJUSTABLE HANDLE, except construction is of strong, high-impact reinforced ABS plastic with a steel insert. An economical threaded design for lighter applications.
Material: ABS handle, black.
Steel insert, black.
LEVER HANDLE
  • REAMED
  • TAPPED
Lever Handle with a plastic ball on the angled lever end. This is a fast, efficient means for obtaining great clamping force. Available with reamed and threaded hole.
Polished satin chrome plating.
Material: Steel handle, Bakelite ball end, red.
CHROME CLAMP LEVER HANDLE, ANGLED TYPE, "A"; STRAIGHT TYPE, "B"
  • REAMED
  • LEVER HANDLE
  • TAPPED
HEAVY DUTY LEVER HANDLE
  • WITH 1-HANDLE
  • WITH 3-HANDLE
For heavy duty applications. Handle is available with single and three spoke versions.All handles have a plastic ball at their end. Mounting hole is cross-drilled to fit a pin for easy fastening.
Polished satin chrome.
Material: Steel handle
Bakelite ball end, red.


© Copyright  2014 US Bushing,  All rights reserved.
Current Pageid = 892